search
Search

Enter keywords to search for products, blog posts, and more.


Home > TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m

TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m
TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m

TP49RZ6 Truck-Mounted Concrete Boom Pump — 49m

The TP49RZ6 is our most popular mid-to-high range boom pump for high-rise and large infrastructure projects. 49m vertical reach with a 6-section RZ-type boom covers most commercial and residential towers up to 15 floors. Available on 8×4 (Sitrak) or 6×4 (Sinotruk) chassis. Max output 180 m³/h at low gear with 12 MPa concrete pressure — enough for demanding mix designs including high-strength and fiber-reinforced concrete. PLC/CAN-BUS electronic controls with wireless remote operation.

1. Using well-known brand transmission parts to ensure the reliability of the power system.
2. Using imported multi-way valve to ensure the safety of working conditions
3. Telescopic rear outrigger swing out, front outriggers "X" type, suitable for narrow construction conditions
4. Optimized boom design, fold and unfold smoothly, a wider range of booms to meet different requirements
5. High reliable pneumatic components
6. Large capacity water tank and high pressure cleaner facilitates cleaning after the work is completed
7. Automatic centralized lubrication system is convenient for some of the main parts, extending the equipment lifespan
8. Electronic control system using PLC/CAN-BUS,according to diesel engine of chassis

Technial Parameters

ITEMSUNITSTP49RZ6
Boom SystemVertical Reachm49
Horizontal Reachm44
Slewing Angle°±270
Rubber Hose Lengthm3
Pumping SystemTheoretical Output (Low/High)m³/h180/120
Theoretical Pressure (Low/High)MPa8.3/12
Distribution Valve/S Valve
Hydraulic System PressureMPa32
Concrete Cylinder (Bore×Stroke)mm260×1900
Delivery Line Diameter/DN125
Hopper CapacityL700
Chassis Brand/Sitrak / Sinotruk
ChassisAxles/8×4 / 6×4
Engine PowerkW316/324 / 297
Travel Speedkm/h≤85 / ≤90
Wheelbasemm1950+4500+1400 / 4650+1400
OverallOverall Dimensions (L×W×H)mm12590×2500×4000 / 12190×2500×3960
Total Weightkg38500 / 35000


Dimensions & Working Range

The working-range diagram shows the boom’s reach envelope: the heights and horizontal distances the TP63RZ6 can place concrete at from a single set-up. The vertical reach is the maximum height to the end hose; the horizontal reach is measured from the slewing centre. Actual reach on site depends on outrigger spread and ground conditions — read it together with the dimensional drawing to confirm the truck fits your access and set-up area.

Applications

The TP63RZ6 is specified where reach and output both matter — the large, tall pours where a smaller boom pump cannot get the concrete high enough or fast enough.

High-rise residential and commercial towers

With 62.5 m of vertical reach, this 63 m boom pump places concrete directly on roughly 18–20 storeys without a separate riser line, covering most mid- and high-rise towers from a single position. For taller cores, it feeds a stationary pump and placing-boom system.


Large infrastructure and bridges

The 58.5 m horizontal reach and ±270° slewing let the boom work out over piers, abutments, deep foundations and wide decks where the truck must stand back from the pour. Output of up to 180 m³/h keeps large continuous pours supplied.


Industrial plants and heavy foundations

Big raft foundations, industrial floors and heavy structural pours benefit from the combination of long boom and high output, with the 260 × 1900 mm twin cylinders and DN125 line moving demanding, low-slump and fibre-reinforced mixes.


Demanding concrete mixes

At 12 MPa concrete pressure with an S-valve and a 700 L hopper, the TP63RZ6 handles high-strength and fibre-reinforced concrete, not only standard mixes — useful on structural and high-spec work.


FAQs

What is a hybrid stepper motor?

What is a hybrid stepper motor?

What NEMA sizes do you offer?

What NEMA sizes do you offer?

Can you customize the motor shaft and winding?

Can you customize the motor shaft and winding?

What is the difference between 2-phase and 3-phase stepper motors?

What is the difference between 2-phase and 3-phase stepper motors?

How long does it take to get custom samples?

How long does it take to get custom samples?

Do your stepper motors come with drivers?

Do your stepper motors come with drivers?

WeChat QR Code

Scan to add WeChat